Order Products : sales@su-jiao.com
Generic Nylon 12 - Unspecified
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qGvP36_Generic-Nylon-12---Unspecified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Nylon 12 - Unspecified This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1220 | kg/m³ | ISO 1183 1 |
| Melt volume-flow rate | 3.63 | cm³/10min | ISO 1133 2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile modulus | 3860 | MPa | ISO 527-2 3 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 4 | ||
| -30°C | 11.0 | kJ/m² | |
| 23°C | 13.5 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 5 | ||
| 0.45 MPa | 159 | °C | |
| 1.8 MPa | 117 | °C | |
| Vicat Softening Temperature (50°C/h, B (50N)) | 157 | °C | ISO 306 6 |
| CLTE - Flow | 6.5E-5 | cm/cm/°C | ISO 11359-2 7 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Relative Permittivity | IEC 60250 8 | ||
| 100 Hz | 4.50 | ||
| 1 MHz | 4.00 | ||
| Dissipation Factor | IEC 60250 9 | ||
| 100 Hz | 0.087 | ||
| 1 MHz | 0.028 |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EP300R | PolyMirae | PP Copolymer | Moplen |
| Ferro PP HPP30GR45BK | Ferro Corporation | PP, Unspecified | Ferro PP |
| KOPLA PP KPT1030 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
| TECHNYL® A 216 V33 GREY 3067 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
| PENTAMID B H TF25 black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
