TECHNYL® A 205F BLACK 651 Datasheet,Nylon 66,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® A 205F Black 651 is an unreinforced polyamide 66 for injection moulding. This grade offers two main advantages: excellent filling qualities and UL 94 V2 under 0.4 mm. It is particularly suitable for the moulding of long parts with thin wall sections

General Information
Features	Fast molding cycle Good liquidity Good demoulding performance
Uses	Large household appliances and small household appliances Application in Automobile Field
Agency Ratings	EN 45545 UL QMFZ2
RoHS Compliance	RoHS compliance
Appearance	White Black Grey Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA66

Physical	Dry	Conditioned	Unit	Test Method
Density	1.14	--	g/cm³	ISO 1183/A
Water Absorption				ISO 62
23°C, 24 hr	1.2	--	%	ISO 62
Equilibrium, 23°C, 50% RH	2.8	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	3200	1400	MPa	ISO 527-2/1A
Tensile Strength
Yield, 23°C	80.0	--	MPa	ASTM D638
Yield, 23°C	80.0	50.0	MPa	ISO 527-2/1A
Fracture, 23°C	70.0	45.0	MPa	ISO 527-2/1A
Tensile Strain
Yield, 23°C	4.0	10	%	ISO 527-2
Fracture, 23°C	25	--	%	ASTM D638
Fracture, 23°C	30	> 100	%	ISO 527-2
Flexural Modulus
23°C	3350	--	MPa	ASTM D790
23°C	3000	1500	MPa	ISO 178
Flexural Strength
23°C	125	--	MPa	ASTM D790
23°C	110	50.0	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (23°C)	5.0	10	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	No Break	No Break		ISO 179/1eU
Notched Izod Impact (23°C)	5.0	10	kJ/m²	ISO 180
Unnotched Izod Impact (23°C)	45.0 kJ/m²	No Break		ASTM D256
Unnotched Izod Impact Strength (23°C)	No Break	No Break		ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	205	--	°C	ISO 75-2/Bf
1.8 MPa, not annealed	65.0	--	°C	ISO 75-2/Af
Melting Temperature	263	--	°C	ISO 11357-3

Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity	5.0E+15	1.0E+14	ohms	IEC 60093
Volume Resistivity	1.0E+15	1.0E+15	ohms·cm	IEC 60093
Dielectric Strength (2.00 mm)	27	26	kV/mm	IEC 60243-1
Relative Permittivity	2.90	3.20		IEC 60250
Dissipation Factor	0.030	0.080		IEC 60250
Comparative Tracking Index				IEC 60112
Solution a	600	600	V	IEC 60112
Solution B	550	--	V	IEC 60112

Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating				UL 94
0.40 mm	V-2	--		UL 94
0.8 mm	V-2	--		UL 94
1.6 mm	V-2	--		UL 94
Glow Wire Flammability Index (1.6 mm)	850	--	°C	IEC 60695-2-12
Oxygen Index	29	--	%	ISO 4589-2

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	265 - 275	°C
Middle Temperature	270 - 280	°C
Front Temperature	280 - 285	°C
Mold Temperature	60 - 80	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For unfilled polyamide, Solvay recommends the use of high alloy steel with a weak chromium content. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 66 , Polyamide 66
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	qGbGkO_TECHNYLA205FBLACK651.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SLOVAMID® 66 GF 13 TS	Plastcom	Nylon 66	SLOVAMID® 66
VENYL UFRHW 301 NOIR 8229	AD majoris	Nylon 66	VENYL
Ultramid® T KR 4350	BASF Corporation	Nylon 6/6T	Ultramid®
ENFLEX S3150D	ENPLAST Americas, a Ravago Group Company	TPO (POE)	ENFLEX
Hipolyene 8515 TY	Zylog Plastalloys	TPO (POE)	Hipolyene