Category: | EMAA , Ethylene Methacrylic Acid |
Manufacturer: | DuPont Packaging & Industrial Polymers |
Trademark: | Nucrel® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | qEil3S_Nucrel-0910HS.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Nucrel® 0910HS is a copolymer of ethylene and methacrylic acid made with nominally 9 wt% methacrylic acid. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment. |
General Information | |
---|---|
Features |
|
Agency Ratings |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.930 | g/cm³ | ASTM D792, ISO 1183 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 10 | g/10 min | ASTM D1238, ISO 1133 |
Methacrylic Acid Content | 8.7 | wt% |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Freezing Point | |||
-- | 84 | °C | ISO 3146 |
-- | 84 | °C | ASTM D3418 |
Vicat Softening Temperature | 86.0 | °C | ASTM D1525, ISO 306 |
Peak Melting Temperature | 103 | °C | ASTM D3418, ISO 3146 |
Extrusion | Nominal Value | Unit | |
---|---|---|---|
Cylinder Zone 1 Temp. | 185 | °C | |
Cylinder Zone 2 Temp. | 235 | °C | |
Cylinder Zone 3 Temp. | 260 | °C | |
Cylinder Zone 4 Temp. | 285 | °C | |
Cylinder Zone 5 Temp. | 285 | °C | |
Adapter Temperature | 285 | °C | |
Melt Temperature | < 310 | °C | |
Die Temperature | 285 | °C |
Extrusion instructions |
---|
Processing conditions shown are for extrusion coating/lamination. |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
RTP 4000 MG 50 | RTP Company | PPA | RTP |
Stanyl® TE351 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
Moplen EP5015 | PolyMirae | PP Impact Copolymer | Moplen |
EOS PA 2200 Balance 1.0 | EOS GmbH | Nylon 12 | EOS |
LEXAN™ LC120 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |