Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FC 2120
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | qB4W4b_3M-Dyneon-Fluoroelastomer-FC-2120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Flouroelastomer FC 2120 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FC 2120 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.80 | g/cm³ |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3575 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| SEETEC LLDPE UF317 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| tefanyl® VR VRGR 321 | Mitsubishi Chemical Performance Polymers, Inc. | PVC, Rigid | tefanyl® VR |
| Badamid® B70 GK30 | Bada AG | Nylon 6 | Badamid® |
| Kingfa JH960 HT10 | Kingfa | PC+ABS | Kingfa |
