Order Products : sales@su-jiao.com
Greene FKM 761
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | Greene, Tweed & Co. |
| Trademark: | Greene FKM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | q96IDI_Greene-FKM-761.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Greene FKM 761 is a Fluoroelastomer product. It is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.80 | g/cm³ | ASTM D297 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 75 | ASTM D785 | |
| Durometer Hardness (Shore A) | 77 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1 | ASTM D1894 | ||
| vs. Itself - Dynamic | 1.1 | ||
| vs. Itself - Static | 1.2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 2.48 | MPa | |
| 100% Strain | 6.89 | MPa | |
| Tensile Strength (Break) | 16.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 190 | % | ASTM D412 |
| Compression Set 2 | ASTM D395 | ||
| 24°C, 70 hr | 7.0 | % | |
| 175°C, 166 hr | 24 | % | |
| 200°C, 22 hr | 12 | % |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (276°C, 70 hr) | -25 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (276°C, 70 hr) | -8.0 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 276°C, 70 hr) | -1.0 | ASTM D573 | |
| Change in Tensile Strength | ASTM D471 | ||
| 24°C, 70 hr, in Reference Fuel B | -12 | % | |
| 200°C, 70 hr, in Reference Oil 300 | -12 | % | |
| Change in Ultimate Elongation | ASTM D471 | ||
| 24°C, 70 hr, in Reference Fuel B | 2.0 | % | |
| 200°C, 70 hr, in Reference Oil 300 | 13 | % | |
| Change in Durometer Hardness | ASTM D471 | ||
| Shore A, 24°C, 70 hr, in Reference Fuel B | -2.0 | ||
| Shore A, 200°C, 70 hr, in Reference Oil 300 | -6.0 | ||
| Change in Mass (276°C, 70 hr, in Air) | -8.0 | % | ASTM D471 |
| Change in Volume | ASTM D471 | ||
| 24°C, 70 hr, in Reference Fuel B | 2.3 | % | |
| 200°C, 70 hr, in Reference Oil 300 | 15 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 2.2E-4 | cm/cm/°C | ASTM E228 |
| Service Temperature | -40 to 232 | °C |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Rubber Classification | FKM | ASTM D1418 |
| Note Message | |
|---|---|
| 1 . | Method C |
| 2 . | 25% Deflection |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1303 TFE 10 | RTP Company | PPS | RTP |
| Sylvin 2932-67 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Chemical Resources PC2200 | Chemical Resources, Inc. | PC | Chemical Resources |
| Daelim Po1y® LL-04SUV | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| Dryflex® 600581 | ELASTO | TPE | Dryflex® |
