Order Products : sales@su-jiao.com

Nucrel® AE

Category:	EMAAA , Ethylene Methyl Acrylate Acrylic Acid
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	Nucrel®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	q2GOfa_Nucrel-AE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Nucrel® AE is a terpolymer of ethylene, methacrylic acid, and acrylate. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins. It can be used as a modifier for PE in blends of approximately 20 to 40% Nucrel® AE with 80 to 60% LDPE for enhancement of foil adhesion properties. The level of adhesion improvement depends on processing conditions. Foil-containing pouches and sachets for packaging non-aggressive food and miscellaneous non-food products. Snack structures Other foil, metallized film, or paper coatings as a heat seal or tie layer

Message

Nucrel® AE is a terpolymer of ethylene, methacrylic acid, and acrylate. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins.

It can be used as a modifier for PE in blends of approximately 20 to 40% Nucrel® AE with 80 to 60% LDPE for enhancement of foil adhesion properties. The level of adhesion improvement depends on processing conditions.

Foil-containing pouches and sachets for packaging non-aggressive food and miscellaneous non-food products.

Snack structures

Other foil, metallized film, or paper coatings as a heat seal or tie layer

General Information
Features	Good Adhesion
Uses	Coating Applications Foil Coatings Food Packaging Laminates Packaging Paper Coatings
Agency Ratings	FDA 21 CFR 177.1330(b)
Forms	Pellets
Processing Method	Coextrusion Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.920	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	11	g/10 min	ASTM D1238, ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	79.0	°C	ASTM D1525, ISO 306
Peak Melting Temperature	105	°C	ASTM D3418, ISO 3146
Freezing Point	85	°C	ASTM D3418

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	185	°C
Cylinder Zone 2 Temp.	235	°C
Cylinder Zone 3 Temp.	285	°C
Cylinder Zone 4 Temp.	310	°C
Cylinder Zone 5 Temp.	310	°C
Adapter Temperature	310	°C
Melt Temperature	< 335	°C
Die Temperature	310	°C

Resin Grade	Manufacturer	Category	Trademark
RheTech Polypropylene HP511-00	RheTech, Inc.	PP Copolymer	RheTech Polypropylene
Small Boss HS-105-1	Tongxiang Small Boss Special Plastic Products Co., Ltd.	PVC, Unspecified	Small Boss
SUPREME HIPS SH 731E	Supreme Petrochem Ltd.	PS (HIPS)	SUPREME HIPS
HiFill® TPU 0600	Techmer Engineered Solutions	TPU, Unspecified	HiFill®
LUVOCOM® 80-7917 VP	Lehmann & Voss & Co.	Acetal (POM) Copolymer	LUVOCOM®