Order Products : sales@su-jiao.com

AMPLIFY™ TY 1057H

Category:	MAH-g , Functional Polymer
Manufacturer:	The Dow Chemical Company
Trademark:	AMPLIFY™ TY
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	q0Azdf_AMPLIFY-TY-1057H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
AMPLIFY™ TY 1057H is a part of the AMPLIFY Functional Polymer portfolio. AMPLIFY™ TY 1057H is a maleic anhydride grafted (MAH) polymer designed as a graft concentrate and is intended to be in-line blended with non-grafted polymer. The level of AMPLIFY™ TY 1057H relative to the non-grafted polymer is dependent upon the targeted adhesion level. The higher the loading of AMPLIFY™ TY 1057H the relatively higher level of adhesion to either EVOH or polyamide. Main Characteristics: Rapid dispersing capability Excellent adhesion to polyamide and EVOH Excellent physical properties Wide range of process and service temperature For blown and cast film Complies with: (EU) No 10/2011 US FDA 21 CFR 175.105 (c)(5) Consult the regulations for complete details.

Message

AMPLIFY™ TY 1057H is a part of the AMPLIFY Functional Polymer portfolio. AMPLIFY™ TY 1057H is a maleic anhydride grafted (MAH) polymer designed as a graft concentrate and is intended to be in-line blended with non-grafted polymer. The level of AMPLIFY™ TY 1057H relative to the non-grafted polymer is dependent upon the targeted adhesion level. The higher the loading of AMPLIFY™ TY 1057H the relatively higher level of adhesion to either EVOH or polyamide.

Main Characteristics:

Rapid dispersing capability

Excellent adhesion to polyamide and EVOH

Excellent physical properties

Wide range of process and service temperature

For blown and cast film

Complies with:

(EU) No 10/2011

US FDA 21 CFR 175.105 (c)(5)

Consult the regulations for complete details.

General Information
Agency Ratings	EU 10/2011 FDA 21 CFR 175.105(c) (5)
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.912	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.0	g/10 min	ASTM D1238
MAH Graft Level ¹	High		Internal Method

Note Message
1 .	Low: <0.25 wt%, Medium 0.25-0.5, High >0.5 wt%

Resin Grade	Manufacturer	Category	Trademark
Sylvin 9077-90 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Axiall PVC 1851 Clear 7002	Axiall Corporation	PVC, Flexible	Axiall PVC
Colorite CS Series CS1534SR	Colorite Polymers	PVC, Flexible	Colorite CS Series
GAPEX® FPP30GQ18HB TAN	Ferro Corporation	PP, Unspecified	GAPEX®
KMI PP KM-103FB	KMI Group, Inc.	PP Impact Copolymer	KMI PP