Order Products : sales@su-jiao.com
ULTEM™ 1285 resin
| Category: | PEI , Polyether Imide |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | ULTEM™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pzQQnG_ULTEM-1285-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Transparent Polyetherimide blend. ECO Conforming. US FDA and EU Food Contact Compliant in recognized colors. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Multi-Point Data |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (295°C/6.6 kg) | 8.1 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.60 to 0.70 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 3380 | MPa | ASTM D638 |
| Tensile Strength 2 | ASTM D638 | ||
| Yield | 110 | MPa | |
| Break | 82.7 | MPa | |
| Tensile Elongation 3(Break) | 60 | % | ASTM D638 |
| Flexural Modulus 4(100 mm Span) | 3380 | MPa | ASTM D790 |
| Flexural Strength 5(Yield, 100 mm Span) | 165 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 27 | J/m | ASTM D256 |
| Reverse Notch Izod Impact (3.20 mm) | 950 | J/m | ASTM D256 |
| Instrumented Dart Impact (23°C, Total Energy) | 40.7 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.40 mm) | 165 | °C | ASTM D648 |
| Vicat Softening Temperature | 181 | °C | ASTM D1525 6 |
| CLTE | ASTM E831 | ||
| Flow : -40 to 40°C | 4.9E-5 | cm/cm/°C | |
| Transverse : -40 to 40°C | 4.9E-5 | cm/cm/°C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 149 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Drying Time, Maximum | 24 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Suggested Shot Size | 40 to 60 | % | |
| Rear Temperature | 282 to 316 | °C | |
| Middle Temperature | 288 to 321 | °C | |
| Front Temperature | 293 to 327 | °C | |
| Nozzle Temperature | 299 to 332 | °C | |
| Processing (Melt) Temp | 299 to 332 | °C | |
| Mold Temperature | 93.3 to 149 | °C | |
| Back Pressure | 0.689 to 1.38 | MPa | |
| Screw Speed | 50 to 100 | rpm | |
| Vent Depth | 0.025 to 0.076 | mm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | Type I, 5.0 mm/min |
| 3 . | Type I, 5.0 mm/min |
| 4 . | 2.6 mm/min |
| 5 . | 2.6 mm/min |
| 6 . | Rate B (120°C/h), Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Solprene® 1433 | Dynasol Elastomers | SBR, Solution | Solprene® |
| Mylar® WC (500 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Flextuff® S2400-00-E | Noble Polymers | TPE | Flextuff® |
| DURANEX® 652SA | Polyplastics Co., Ltd. | ABS+PBT | DURANEX® |
| Rotuba CAB B900 (5% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
