Order Products : sales@su-jiao.com
MARPOL® MD 12 HLMI
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Marco Polo International, Inc. |
| Trademark: | MARPOL® MD |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pxyU4q_MARPOL-MD-12-HLMI.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Recommended Applications: Landfill liners, gasoline and chemical tanks, containment liners, tunnel moisture barriers and mine tailing collection projects. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.938 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal, F20 | > 1500 | hr | |
| 100% Igepal, F50 | > 1500 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.9 | MPa | ASTM D638 |
| Tensile Elongation 1(Break) | 850 | % | ASTM D638 |
| Flexural Modulus 2 | 827 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 504 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 58.9 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 47.2 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 20 FRA 5 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| VICTREX® PEEK 650P | Victrex plc | PEEK | VICTREX® PEEK |
| TRIMID® N66-SG33-BK | Polymer Technology and Services, LLC | Nylon 66 | TRIMID® |
| DOMAMID® 66ST2F | DOMO Engineering Plastics SPA | Nylon 66 | DOMAMID® |
| LNP™ VERTON™ MV008SU compound | SABIC Innovative Plastics | PP, Unspecified | LNP™ VERTON™ |
