Order Products : sales@su-jiao.com
HIPEX® HX6IDZ (Series: HTR/OR)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | HIPEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | prr7Bq_HIPEXHX6IDZSeriesHTROR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The HTR/OR Series is your material solution for applications requiring high temperature and oil resistance. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Break) | 4.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 240 | % | ISO 37 |
| Tear Strength 3 | 15 | kN/m | ISO 34-1 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 72 hr | 35 | % | ISO 815 |
| 70°C, 24 hr | 50 | % | ISO 815 |
| 120°C, 24 hr | 60 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.10 | % | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 220 | °C | |
| Front Temperature | 230 | °C | |
| Mold Temperature | 40 - 60 | °C | |
| Injection Pressure | 120 - 200 | MPa | |
| Back Pressure | 2.00 - 10.0 | MPa |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| 3 . | Method B, right-angle specimen (cut) |
| 4 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mirathane™ E385 | Miracll Chemicals Co., Ltd. | TPU-Polyester | Mirathane™ |
| XANTAR® RX 2125 | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| ENFLEX V1045D BLK UV | ENPLAST Americas, a Ravago Group Company | TPV | ENFLEX |
| Shinkolite MR | Mitsubishi Rayon Co., Ltd. | Acrylic (PMMA) | Shinkolite |
| Hostacom ERC 487N G62720 | LyondellBasell Industries | PP Copolymer | Hostacom |
