Order Products : sales@su-jiao.com
Marlex® H525
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pqztqL_Marlex-H525.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® H525 is a High Density Polyethylene material. It is available in Latin America or North America for pipe extrusion. Typical application of Marlex® H525: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | > 24.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 700 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3 | 830 | MPa | ASTM D790 |
| Hydrostatic Design Basis | ASTM D2837 | ||
| 23°C | 11.0 | MPa | |
| 60°C | 6.90 | MPa |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Minimum Required Strength | 8.00 | MPa | ISO 9080 |
| PENT | > 500 | hr | ASTM F1473 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 XP-429 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Sylvin 8315-70 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| DuraStar™ MN631 | Eastman Chemical Company | Polyester, TP | DuraStar™ |
| Hostacom TYC727D | LyondellBasell Industries | TPO (POE) | Hostacom |
| Hylex® P1025 L1 HB | Entec Polymers | PC | Hylex® |
