Order Products : sales@su-jiao.com
Generic PAEK
| Category: | PAEK , Polyaryletherketone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ppOxH9_Generic-PAEK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PAEK This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 - 1.53 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.022 - 0.21 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 23°C | 2900 - 3670 | MPa | ASTM D638 |
| 23°C | 3000 - 19400 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Fracture, 23°C | 0.90 - 42 | % | ASTM D638 |
| Fracture, 23°C | 0.90 - 41 | % | ISO 527-2 |
| Flexural Modulus | |||
| 23°C | 2880 - 10600 | MPa | ASTM D790 |
| 23°C | 2500 - 17000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 106 - 290 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 5.5 - 7.6 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 152 - 170 | °C | DSC |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Dielectric Constant (23°C) | 3.06 - 3.12 | ASTM D150 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 135 - 152 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 354 - 380 | °C | |
| Middle Temperature | 365 - 380 | °C | |
| Front Temperature | 370 - 386 | °C | |
| Nozzle Temperature | 373 - 381 | °C | |
| Mold Temperature | 163 - 205 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PAEKThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDILENE H 242 M40 | ADDIPLAST | PP Homopolymer | ADDILENE |
| Exelene® LLDPE 20400 | Montachem International, Inc. | LLDPE | Exelene® LLDPE |
| Kingfa MAC-451 UV | Kingfa | PC+ABS | Kingfa |
| LUVOCOM® 1105/GR/15/TF/15-2 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| Hylex® P1303L2 HB | Entec Polymers | PC | Hylex® |
