Order Products : sales@su-jiao.com
Forprene® 6E1001A75
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pmoguG_Forprene-6E1001A75.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Forprene®6E1001A75 is a thermoplastic vulcanized rubber (TPV) material,. This product is available in North America, Latin America or Europe. The processing method is extrusion or injection molding. Forprene®The main features of 6E1001A75 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 77 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 2.50 | MPa | ASTM D412 |
| Tensile Strength 2 | 5.50 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 500 | % | ASTM D412 |
| Tear Strength 4 | 25.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 48 | % | ASTM D395B |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | UL 94 | |
| 3.20 mm | V-0 | UL 94 | |
| Oxygen Index | 24 | % | ASTM D2863 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Rear Temperature | 160 | °C | |
| Middle Temperature | 170 | °C | |
| Front Temperature | 180 | °C | |
| Nozzle Temperature | 185 | °C | |
| Mold Temperature | 20.0 - 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 185 | °C | |
| Die Temperature | 185 | °C |
| Extrusion instructions |
|---|
| Extrusion Head Temperature: 195°C |
| Note Message | |
|---|---|
| 1 . | Mouth die c |
| 2 . | Mouth die c |
| 3 . | Mouth die c |
| 4 . | C mould |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vyncolit® 2008 | Vyncolit N.V. | Epoxy | Vyncolit® |
| Baydur® 641 IBS (20 pcf) | Covestro - PUR | PUR-MDI | Baydur® |
| LNP™ THERMOCOMP™ RZ0069 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| Monprene® IN-22958D (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
| Resilience™ LS11000M | PolyOne Corporation | PVC, Rigid | Resilience™ |
