Order Products : sales@su-jiao.com

DeWAL DW 2000

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	DeWAL Industries
Trademark:	DeWAL
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pgyCy0_DeWAL-DW-2000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
D/W 2000 is a skived PTFE (Polytetrafluoroethylene) film held to close tolerance on width and thickness. D/W 2000 conforms to ASTM D 3308 Type II as well as to SAE AMS 3662C. D/W 2000 finds use in electrical applications where high temperature service rating and/or superior electrical properties are desired. This material is often used as a release film in the production of high temperature flex circuit materials as well as in the production of microwave circuit materials where it is seen as both a release film and a bonding film. D/W 2000 is an excellent release film for the molding of composite structures.

Message

D/W 2000 is a skived PTFE (Polytetrafluoroethylene) film held to close tolerance on width and thickness. D/W 2000 conforms to ASTM D 3308 Type II as well as to SAE AMS 3662C.

D/W 2000 finds use in electrical applications where high temperature service rating and/or superior electrical properties are desired. This material is often used as a release film in the production of high temperature flex circuit materials as well as in the production of microwave circuit materials where it is seen as both a release film and a bonding film. D/W 2000 is an excellent release film for the molding of composite structures.

General Information
Features	Good Electrical Properties High Heat Resistance
Uses	Bonding Electrical/Electronic Applications Film Release Film
Agency Ratings	ASTM D 3308
Forms	Film

Physical	Nominal Value	Unit
Thickness	0.1 to 1016.0	µm

Additional Information	Nominal Value	Unit
Core ID	7.62	cm
Maximum Roll OD	356	mm
Width	305 to 1270	mm

Films	Nominal Value	Unit	Test Method
Tensile Strength - MD (Yield)	20.7	MPa	ASTM D882
Tensile Elongation - MD (Break)	330	%	ASTM D882

Thermal	Nominal Value	Unit
Continuous Use Temperature	260	°C

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	79	kV/mm	ASTM D149

Resin Grade	Manufacturer	Category	Trademark
Resiten® CFBM	ITEN INDUSTRIES	Phenolic	Resiten®
THERMOLAST® K TC8GPN (Series: GP/FG)	KRAIBURG TPE	TPE	THERMOLAST® K
King Pearl® G-H	Loyal Chemical	PS (EPS)	King Pearl®
Sylvin 3240-60 Blue 8487	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Sylvin 8980-65 Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin