Order Products : sales@su-jiao.com
Infino VB-8202G
| Category: | PPE , Polyphenylene Ether |
| Manufacturer: | SAMSUNG SDI CO., LTD. |
| Trademark: | Infino |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pgl8kG_Infino-VB-8202G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Infino VB-8202G is a Polyphenylene Ether (PPE) product filled with glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (250°C/10.0 kg) | 4.0 | g/10 min | ASTM D1238, ISO 1133 |
| Ash Content | |||
| -- | 20 | % | ISO 3451 |
| -- | 20 | % | ASTM D5630 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 98.0 | MPa | ASTM D638 |
| Flexural Modulus 2 | 5900 | MPa | ASTM D790 |
| Flexural Strength 3 | 150 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 98 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.40 mm) | 135 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-1 | ||
| 1.60 mm | V-1 | ||
| 3.00 mm | V-1 | ||
| 6.00 mm | V-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 100 | °C | |
| Desiccant Dryer | 100 | °C | |
| Drying Time | |||
| -- | 4.0 | hr | |
| Desiccant Dryer | 2.0 | hr | |
| Suggested Max Moisture | 0.040 | % | |
| Rear Temperature | 260 | °C | |
| Middle Temperature | 260 to 270 | °C | |
| Front Temperature | 270 to 290 | °C | |
| Nozzle Temperature | 290 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C | |
| Injection Pressure | 196 | MPa | |
| Back Pressure | 1.96 to 3.92 | MPa | |
| Screw Speed | 200 to 500 | rpm |
| Note Message | |
|---|---|
| 1 . | 5.0 mm/min |
| 2 . | 2.8 mm/min |
| 3 . | 2.8 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan A-8060/B-6018 | Xuchuan Chemical (Suzhou) Co., Ltd | TPU-Polyester | Xuchuan |
| Algoflon® D 1614 F | Solvay Specialty Polymers | PTFE | Algoflon® |
| ASTALAC™ ASA 305 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| Diakon® LH752 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| DOWLEX™ 2036G | The Dow Chemical Company | LLDPE | DOWLEX™ |
