Order Products : sales@su-jiao.com
S&E PVC GA-7056
| Category: | PVC, Unspecified , Polyvinyl Chloride |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pbyOQN_S-E-PVC-GA-7056.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| S & E PVC GA-7056 is a polyvinyl chloride product,. It is available in North America. Typical application areas are: wire and cable. |
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 90 | ASTM D2240 | |
| Shaw A, 15 seconds | 85 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 9.31 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 15.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 330 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -27.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+13 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 23 | % | ASTM D2863 |
| Additional Information |
|---|
| Suggested Stock Temperature: 370°FTemperature Rating: 60°CMin. Wall Thickness: 0.03 inches |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mediprene® A2 500550M | ELASTO | SEBS | Mediprene® |
| Sarlink® TPE EE-2250N NAT | Teknor Apex Company | TPE | Sarlink® TPE |
| Tecomid® NA40 GR30 NL HS | Eurotec Engineering Plastics | Nylon 66 | Tecomid® |
| Lupolen 4261 AG Q 469 | LyondellBasell Industries | HDPE | Lupolen |
| Dow Corning® QP1-260 | Dow Corning Corporation | Silicone | Dow Corning® |
