Order Products : sales@su-jiao.com

KRATON® D1118 A

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pYMO3D_KRATON-D1118-A.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton D1118 A is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. D1118 AT - supplied as porous pellets dusted with talc D1118 AS - supplied as porous pellets dusted with amorphous silica D1118 ASM - supplied as powder dusted with amorphous silica Kraton D1118 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Message

Kraton D1118 A is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below.

D1118 AT - supplied as porous pellets dusted with talc

D1118 AS - supplied as porous pellets dusted with amorphous silica

D1118 ASM - supplied as powder dusted with amorphous silica

Kraton D1118 A is used as a modifier of bitumen or thermoplastics and in compound formulations. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

General Information
Additive	Antioxidant
Features	Antioxidant Block Copolymer
Uses	Adhesives Coating Applications Footwear Sealants
Appearance	Clear/Transparent
Forms	Pellets Powder

Physical	Nominal Value	Unit	Test Method
Density	0.940	g/cm³	ISO 2781
Solution Viscosity ¹	470 to 790	mPa·s	Internal Method
Antioxidant Additive	0.14 to 0.36	%	Internal Method
Ash Content			ISO 247
AS	0.20 to 0.65	%
ASM	2.5 to 5.0	%
AT	0.30 to 0.65	%
Polystyrene Content	31 to 35	%	Internal Method
Total Extractables	< 1.0	%	Internal Method
Volatile Matter	< 1.0	%	Internal Method

Additional Information	Nominal Value	Unit
Diblock Content	78	%

Note Message
1 .	25%w Toluene, 25°C

Resin Grade	Manufacturer	Category	Trademark
Ravalene CR L 4245	Ravago Group	LDPE	Ravalene
Ultramid® B27 03	BASF Corporation	Nylon 6	Ultramid®
Adell Polyamide BJ-14 Glass Reinforced High Impact	Adell Plastics, Inc.	Nylon 6	Adell Polyamide
Hanwha Total PP HJ730L	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, High Crystal	Hanwha Total PP
MAJORIS DFR210	AD majoris	PP, Unspecified	MAJORIS