Order Products : sales@su-jiao.com
FLEXITEQ™ V78A010UV
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pUCKXS_FLEXITEQ-V78A010UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ V78A010UV is a soft-touch and flexible thermoplastic polyolefin elastomer designed for profile extrusion applications, and can be formulated in a pre-coloured material. FLEXITEQ™ V78A010UV features an optimal balance of processability, formability and toughness together with enhanced heat and UV stability, and can be processed on conventional thermoplastic equipment for extrusion. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 1.4 | g/10 min | |
| 190°C/5.0 kg | 4.8 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 78 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 8.00 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 570 | % | ASTM D412 |
| Tear Strength 3(23°C) | 48.0 | kN/m | ASTM D624 |
| Compression Set 4(23°C, 70 hr) | 40 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Rear Temperature | 130 to 150 | °C | |
| Middle Temperature | 160 to 180 | °C | |
| Front Temperature | 170 to 190 | °C | |
| Processing (Melt) Temp | 170 to 190 | °C |
| Note Message | |
|---|---|
| 1 . | Die C, 500 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAMOFIN PPH300J8 | Polyram Ram-On Industries | PP Homopolymer | RAMOFIN |
| AKROLOY® PA GF 50 black (2706) | AKRO-PLASTIC GmbH | Nylon 66+Nylon 6I/6T | AKROLOY® |
| Borealis PP4821 | Borealis AG | Polyolefin, Unspecified | Borealis |
| Braskem PE ML2400N | Braskem | LLDPE | Braskem PE |
| MAXAMID™ PA66M32T-NC010 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
