Order Products : sales@su-jiao.com
FLEXITEQ™ F55A911UV
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pTZC02_FLEXITEQ-F55A911UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ F55A911UV is a formulation based on Santoprene™ rubber technology. It is formulated to incorporate soft-touch and good mouldability or extrusion, and formulated to bond to ABS, PS, PC, PMMA, ASA, PET & PPO/PS blends in a pre-coloured material. FLEXITEQ™ F55A911UV is a UV improved version and can be processed on conventional thermoplastic equipment for injection moulding or extrusion. It is polyolefin based and completely recyclable. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 55 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 4.50 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 600 | % | ASTM D412 |
| Tear Strength 3(23°C) | 22.0 | kN/m | ASTM D624 |
| Compression Set 4(23°C, 70 hr) | 39 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Rear Temperature | 160 - 210 | °C | |
| Middle Temperature | 180 - 230 | °C | |
| Front Temperature | 190 - 240 | °C | |
| Mold Temperature | 25.0 - 50.0 | °C | |
| Injection Rate | Moderate-Fast |
| Injection instructions |
|---|
| Melt Temperature: 210 - 230°C for two shot mouldingMelt Temperature: 230 - 250°C for insert moulding |
| Extrusion instructions |
|---|
| Melt Temperature: 190 - 205°C for extrusion |
| Note Message | |
|---|---|
| 1 . | C mold, 500 mm/min |
| 2 . | Mouth die C, 500 mm/min |
| 3 . | C mold, 500 mm/min |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Topilene® HJ541CP | Hyosung Corporation | PP Homopolymer | Topilene® |
| Estane® 58238 TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyester | Estane® |
| Greene 965 | Greene, Tweed & Co. | NBR | Greene |
| Sylvin 7833-80 Orange 5107 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Rotuba CAP CP808 (12% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
