Order Products : sales@su-jiao.com

Jieda PA610 Resin

Category:	Nylon 610 , Polyamide 610
Manufacturer:	Cixi Jieda Nanometer Compound Materials Co., LTD.
Trademark:	Jieda
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pSIlKh_JiedaPA610Resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PA610 (Polyamide 610 or nylon 610) is an ivory-white to light yellow translucent solid made by the condensation polymerization of the neutralized salt of sebacic acid and hexanediamine. It has toughness, dimensional stability, wear resistance, oil and alkali resistance, low water absorption, and self-lubricating property. Processing methods of PA610 include extrusion, injection molding, and blow molding. End use applications include gears, bearings, cushions, sealants, insulators, electronic boards, thin films, filaments, etc.

Message

PA610 (Polyamide 610 or nylon 610) is an ivory-white to light yellow translucent solid made by the condensation polymerization of the neutralized salt of sebacic acid and hexanediamine. It has toughness, dimensional stability, wear resistance, oil and alkali resistance, low water absorption, and self-lubricating property. Processing methods of PA610 include extrusion, injection molding, and blow molding. End use applications include gears, bearings, cushions, sealants, insulators, electronic boards, thin films, filaments, etc.

General Information
Features	Good dimensional stability alkali resistance Good wear resistance Oil resistance Good toughness Low or no water absorption Self-lubricating
Uses	Films Gear Blow molding applications Electrical/Electronic Applications Sealant Filament Bearing
Processing Method	Blow molding Extrusion Injection molding

Physical	Nominal Value	Unit
Density	1.09	g/cm³
Water Absorption (Saturation)	0.50	%

Mechanical	Nominal Value	Unit
Tensile Modulus	220	MPa
Tensile Strength	60.0	MPa
Tensile Elongation (Break)	200	%

Impact	Nominal Value	Unit
Unnotched Izod Impact	56	J/m

Thermal	Nominal Value	Unit
Deflection Temperature Under Load (1.8 MPa, Unannealed)	57.0	°C
CLTE - Flow	9.9E-5	cm/cm/°C

Electrical	Nominal Value	Unit
Volume Resistivity	4.0E+14	ohms·cm

Resin Grade	Manufacturer	Category	Trademark
Primefin V500/20	Lucent Polymers, Inc.	PP Homopolymer	Primefin
Ravago Compounds PP-5342-9000	Ravago Manufacturing Americas, LLC	PP Homopolymer	Ravago Compounds
WPP PP PPC3TF1.5UV	Washington Penn Plastic Co. Inc.	PP Impact Copolymer	WPP PP
Guardian III™ PJ	S&E Specialty Polymers, LLC	PVC, Unspecified	Guardian III™
LNP™ THERMOCOMP™ 9X02540 compound	SABIC Innovative Plastics	PC+PET	LNP™ THERMOCOMP™