Order Products : sales@su-jiao.com

NuSil MED-6370

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pSBs5M_NuSil-MED-6370.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives. Comments: SOFT GEL

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing filler, gels tend to be low in viscosity in the uncured state, allowing flexibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very firm or soft gel, but the work time and cure profile can also be modified. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Additionally, NuSil's restricted tacky gels can be used as temporary adhesives.

Comments: SOFT GEL

General Information
Features	Biocompatible Breathable Low Viscosity Soft
Uses	Adhesives Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Penetration Depth ¹	9.00	mm

Uncured Properties	Nominal Value	Unit
Density	0.978	g/cm³
Viscosity	0.60	Pa·s
Curing Time (80°C)	1.5	hr
Pot Life (25°C)	360	min

Note Message
1 .	Shaft Weight/Foot Diameter/Time : 19.5g/6.35mm/5s

Resin Grade	Manufacturer	Category	Trademark
MFE® 9503	Huachang Polymer Co., Ltd.	Polyester Alloy	MFE®
NEXUS PS 625	Nexus Resin Group, LLC.	PS (HIPS)	NEXUS PS
ASTALAC™ ABS MGP22	Marplex Australia Pty. Ltd.	ABS	ASTALAC™
LUBEMID B27 EL40 NATURAL	LUBEN PLAST srl	Nylon 6	LUBEMID
ULTEM™ 2312EPR resin	SABIC Innovative Plastics	PEI	ULTEM™