Order Products : sales@su-jiao.com
Lupolen 3621 M RM Black Powder
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Lupolen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pRs7yV_Lupolen-3621-M-RM-Black-Powder.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lupolen 3621 M RM Black Powder is the black compound version of the new generation hexene linear medium-density polyethylene LP 3621 M RM Black for rotational molding of a variety of articles. The product exhibits excellent ESCR, high impact strength at low temperatures and improved UV resistance. Lupolen 3621 M RM Black Powder is a fully UV-stabilized polymer. The product is delivered as a powder. Tests have shown that this material is resisting against the harmful effect of biodiesel fuel.** It is not intended for use in medical and pharmaceutical applications. ** Resistance is based on our latest patented technology |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1(23°C) | 0.936 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.5 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | > 1000 | hr | ASTM D1693B |
| Full Notch Creep Test 2(50°C) | 15.0 | hr | ISO 16770 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 700 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 17.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 10 | % | ISO 527-2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break) | > 450 | % | ISO 527-3 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | ISO 8256/1A | ||
| -30°C | 104 | kJ/m² | ISO 8256/1A |
| 23°C | 213 | kJ/m² | ISO 8256/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 113 | °C | ISO 306/A50 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 180 - 210 | °C |
| Extrusion instructions |
|---|
| Processing: Recommended range for PIAT (Peak Internal Air Temperature) is 180 - 210 "C. PIAT should not exceed 225 °C. |
| Note Message | |
|---|---|
| 1 . | Density value is given of the base polymer. Final density of the black product is higher due to pigmentation. |
| 2 . | 6.0 MPa, 2% Arkopal N100 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 124789 C | RTP Company | PLA | RTP |
| Gallonprene® GP200-7Q | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Epolene® N-11 | Westlake Chemical Corporation | LDPE | Epolene® |
| Huafon JF-S-8032 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| LNP™ STAT-KON™ CX01039 compound | SABIC Innovative Plastics Europe | PS (HIPS) | LNP™ STAT-KON™ |
