Order Products : sales@su-jiao.com
IROGRAN® A 92 E 4738
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Huntsman Corporation |
| Trademark: | IROGRAN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pR6GIq_IROGRAN-A-92-E-4738.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
IROGRAN A 92 E 4738 is a white-colored, thermoplastic special-polyester-polyurethane for injection moulding applications. Additional characteristics of the product are flexibility and high mechanical resistance. PERFORMANCE FEATURES
APPLICATIONS For the production of tooth belts, round cordsprofiles, high pressure hoses. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | |
| Melt Volume-Flow Rate (MVR) (220°C/10.0 kg) | 40.0 | cm³/10min | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240, ISO 868 | ||
| Shore A, Injection Molding | 92 | ASTM D2240, ISO 868 | |
| Shore D, Injection Molding | 41 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion | 25 | mm³ | ISO 4649 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | DIN 53504 | ||
| 100% strain | 8.00 | MPa | DIN 53504 |
| 300% strain | 24.0 | MPa | DIN 53504 |
| Tensile Stress 2(Break) | 55.0 | MPa | DIN 53504 |
| Tensile Elongation 3(Break) | 450 | % | DIN 53504 |
| Tear Strength 4 | 110 | kN/m | ISO 34-1 |
| Compression Set 5 | ASTM D395, ISO 815 | ||
| 23°C, 24 hr | 25 | % | ASTM D395, ISO 815 |
| 70°C, 24 hr | 40 | % | ASTM D395, ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| -- | 100 - 110 | °C | |
| Vacuum dryer | 80.0 - 90.0 | °C | |
| Drying Time | |||
| -- | 3.0 | hr | |
| Vacuum dryer | 3.0 | hr | |
| Dew Point | -30.0 | °C | |
| Rear Temperature | 175 - 195 | °C | |
| Middle Temperature | 175 - 195 | °C | |
| Front Temperature | 175 - 195 | °C | |
| Nozzle Temperature | 180 - 200 | °C | |
| Mold Temperature | 20.0 - 70.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 - 110 | °C | |
| Drying Time | 3.0 | hr | |
| Hopper Temperature | 25.0 - 40.0 | °C | |
| Cylinder Zone 1 Temp. | 165 - 190 | °C | |
| Cylinder Zone 2 Temp. | 165 - 190 | °C | |
| Cylinder Zone 3 Temp. | 165 - 190 | °C | |
| Cylinder Zone 4 Temp. | 165 - 190 | °C | |
| Cylinder Zone 5 Temp. | 165 - 190 | °C | |
| Adapter Temperature | 175 - 195 | °C | |
| Die Temperature | 175 - 200 | °C |
| Extrusion instructions |
|---|
| Nozzle: 170 to 200°C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| 3 . | Injection Molded |
| 4 . | Injection Molded |
| 5 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Prixene® EP005E50 | POLYMAT | HMWPE | Prixene® |
| SureSpec HS-030 | Genesis Polymers | PS (HIPS) | SureSpec |
| MORETEC™ 0438CN | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| Durez® 33471 | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| Plenco 01510 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
