Casico™ FR4807 Datasheet,Polyolefin, Unspecified,Borealis AG-SHANGHAI SUSHENG

Message
Casico FR4807 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural jacketing compound combining with excellent extrusion properties. It is based on the novel technology, Casico, containing inorganic filler and a novel char-forming additive which confer flame retardancy with very limited smoke generation. It can be used in areas sensitive to smoke or corrosive and toxic combustion products. For most cable constructions, Casico FR4807 has sufficient flame retardancy to satisfy single wire vertical burning tests. Casico FR4807 meets the applicable requirements below using sound commercial extrusion practice and testing procedures: BS 7655 LTS3 EN 50173 EN 50290-2-27 EN 50363-8 TM7 IEC 60227 VDE 0207 Teil 24 (HM2) VDE 0250 Teil 215

General Information
Filler / Reinforcement	Filler
Additive	Flame Retardant UV Stabilizer
Features	Flame Retardant Good Colorability Good Corrosion Resistance Good Processability Halogen Free Low Smoke Emission Low Toxicity Moisture Resistant
Uses	Cable Jacketing Flexible Cord Insulation Flexible Jacketing Wire & Cable Applications
Agency Ratings	BS 7655 LTS3 EN 50173 IEC 60227 VDE 0207 Teil 24 (HM2)
Appearance	Natural Color
Forms	Granules
Processing Method	Extrusion

Physical	Nominal Value	Unit	Test Method
Density ¹	1.15	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ISO 1133
Water Absorption (70°C) ²	0.400	mg/cm²	IEC 60811-1-3

Thermal	Nominal Value		Test Method
Cold Bend (-40°C) ³	Pass		IEC 60811-1-4
Cold Impact (-40°C) ⁴	Pass		IEC 60811-1-4

Flammability	Nominal Value	Unit	Test Method
NBS Smoke Density			ASTM E662
-- ⁵	6.0	min
-- ⁶	46.0
-- ⁷	20.0	min
-- ⁸	54.0

Additional Information	Nominal Value	Unit	Test Method
Breakdown Duration ⁹	Pass		IEC 60227-2/2.3
Breakdown Voltage ¹⁰	32000	V	ISO 6722
Cone Calorimeter			ISO 5660
-- ¹¹	1.80	kg/m³
Average Heat Release ¹²	193	kW/m²
CO ¹³	0.260	kg/m³
Heat Combustion ¹⁴	28.0
Ignition time ¹⁵	2.2	min
Max Heat Release ¹⁶	335	kW/m²
Smoke Obscuration ¹⁷	531
Corrosion - of Combustion Fumes ¹⁸	1.80	µS/cm	IEC 60754-2
Pressure Test (80°C) ¹⁹	17	%	IEC 60811-3-1

Hardness	Nominal Value	Unit	Test Method
Shore Hardness ²⁰(Shore D, 15 sec)	31		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)	11.5	MPa	IEC 60811-1-1
Tensile Strain ²¹(Break)	700	%	IEC 60811-1-1
Flexural Modulus ²²	100	MPa	ISO 178

Aging	Nominal Value	Unit	Test Method
Change in Tensile Stress
-- ²³	> -80	%	ISO 1817
100°C, 240 hr ²⁴	> -80	%	IEC 60811-1-2

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity ²⁵	6.0E+15	ohms·cm	IEC 60093
Electric Strength	> 20	kV/mm	IEC 60243-1

Flammability	Nominal Value	Unit	Test Method
Oxygen Index ²⁶	34	%

Note Message
1 .	Compound, ISO 1872-2
2 .	14 days, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
3 .	Cable (0.7 mm insulation over 1.5 mm² solid Cu)
4 .	Cable (0.7 mm insulation over 1.5 mm² solid Cu)
5 .	Time to Dmax, (76x76x0.7 mm plaque), Flaming mode
6 .	Optical smoke density Dmax, (76x76x0.7 mm plaque), Flaming mode
7 .	Time to Dmax, (76x76x0.7 mm plaque), Non-flaming mode
8 .	Optical smoke density Dmax, (76x76x0.7 mm plaque), Non-flaming mode
9 .	Cable (0.7 mm insulation over 1.5 mm² solid Cu)
10 .	Cable (0.7 mm insulation over 1.5 mm² solid Cu)
11 .	heat flux 35 kW/m2, 3 mm plaque
12 .	heat flux 35 kW/m2, 3 mm plaque
13 .	heat flux 35 kW/m2, 3 mm plaque
14 .	heat flux 35 kW/m2, 3 mm plaque, MJ/dm3
15 .	heat flux 35 kW/m2, 3 mm plaque
16 .	heat flux 35 kW/m2, 3 mm plaque
17 .	heat flux 35 kW/m2, 3 mm plaque, m2/dm3
18 .	Compound, 5.3
19 .	at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
20 .	Compound
21 .	Cable (0.7 mm insulation over 1.5 mm² solid Cu)
22 .	Compound
23 .	After UV ageing, Cable (0.7 mm insulation over 1.5 mm² solid Cu)
24 .	Cable (0.7 mm insulation over 1.5 mm² solid Cu)
25 .	Compound
26 .	Compound

Category:	Polyolefin, Unspecified , Polyolefin
Manufacturer:	Borealis AG
Trademark:	Casico™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pQIf4p_Casico-FR4807.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
SLOVALEN® PC 13 T 30	Plastcom	PP, Unspecified	SLOVALEN®
DURACON® M270-45	Polyplastics Co., Ltd.	Acetal (POM) Copolymer	DURACON®
Geon™ HTX E1502	PolyOne Corporation	PVC Alloy	Geon™ HTX
ISOPAK® 640	Great Eastern Resins Industrial Co Ltd (GRECO)	PC+ABS	ISOPAK®
ISOTHANE® 3070DU-W	Great Eastern Resins Industrial Co., Ltd. (GRECO)	TPU-Polyether	ISOTHANE®