Order Products : sales@su-jiao.com
Akulon® XP36-D1H
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | DSM Engineering Plastics |
| Trademark: | Akulon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pPLib3_Akulon-XP36-D1H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Akulon® XP36-D1H is a Polyamide 6 (Nylon 6) material. It is available in Europe for extrusion or injection molding. Important attributes of Akulon® XP36-D1H are:
Typical application of Akulon® XP36-D1H: Hose/Tubing |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 | g/cm³ | ISO 1183 |
| Viscosity Number | 197 | cm³/g | ISO 307 |
| Mechanical | Nominal Value | Test Method | |
|---|---|---|---|
| Coefficient of Friction (vs. Itself - Dynamic) | 0.80 | ISO 8295 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 1.0E-4 | cm/cm/°C | ISO 11359-2 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| RSV - formic acid 1 | 3.00 | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 4.0 to 8.0 | hr | |
| Dew Point | -40.0 to -30.0 | °C | |
| Rear Temperature | 265 to 285 | °C | |
| Middle Temperature | 275 to 290 | °C | |
| Front Temperature | 280 to 295 | °C | |
| Nozzle Temperature | 280 to 290 | °C | |
| Processing (Melt) Temp | 270 to 295 | °C | |
| Mold Temperature | 50.0 to 80.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 3.00 to 10.0 | MPa | |
| Screw Compression Ratio | 2.5:1.0 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 | °C | |
| Drying Time | 8.0 to 10 | hr | |
| Suggested Max Moisture | < 0.070 | % | |
| Cylinder Zone 1 Temp. | 255 | °C | |
| Cylinder Zone 2 Temp. | 260 | °C | |
| Cylinder Zone 3 Temp. | 260 | °C | |
| Adapter Temperature | 260 | °C | |
| Die Temperature | 260 | °C |
| Note Message | |
|---|---|
| 1 . | 1g/100 ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PP P1000 | Nanjing Hongrui Engineering Plastics Co., Ltd. | PP, Unspecified | Nanjing Hongrui PP |
| Fixmaster Fast Set Grout | Loctite® | Epoxy | Fixmaster |
| ENFLEX S3380A | ENPLAST Americas, a Ravago Group Company | TPE | ENFLEX |
| KOPLA PA66 KDP1200 | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| Jiangsu Sinarise JM8713 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
