Order Products : sales@su-jiao.com
Shinko-Lac® ASA TW30
| Category: | ASA , Acrylonitrile Styrene Acrylate |
| Manufacturer: | Mitsubishi Rayon America Inc. |
| Trademark: | Shinko-Lac® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pP5auh_Shinko-Lac-ASA-TW30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Shinko-Lac® ASA TW30 is an Acrylonitrile Styrene Acrylate (ASA) material. It is available in North America for injection molding. Primary attribute of Shinko-Lac® ASA TW30: Heat Resistant. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (220°C/10.0 kg) | 3.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.55 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 106 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 45.1 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2260 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 68.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 120 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm, Injection Molded | 121 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm, Injection Molded | 108 | °C | |
| Vicat Softening Temperature | 122 | °C | ISO 306/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Utility Nylon 6 6 UVST BLK | ResMart | Nylon 66 | ResMart Utility |
| Styropor® F 415 E | BASF Corporation | PS (EPS) | Styropor® |
| Cereplast Hybrid Resins® 103 | Cereplast, Inc. | PP Alloy | Cereplast Hybrid Resins® |
| DOMAMID® A1-008-V30-H2-DB | DOMO Engineering Plastics GmbH | Nylon 6 | DOMAMID® |
| HiFill FR® PA6 GF33 FR-NR | Techmer Engineered Solutions | Nylon 66 | HiFill FR® |
