Order Products : sales@su-jiao.com
Cosmic Epoxy EH81
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic Epoxy |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pOzqos_Cosmic-Epoxy-EH81.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic EH81 is an iron filled epoxy molding compound which is supplied in a granular form. FEATURES This material flows easily under low pressure and provides good moldability. APPLICATIONS The material is good for EMI / RFI shielding, and can be either compression or transfer molded to fabricate core rods and to encapsulate surface mount and axial leaded inductors. This single molded compound eliminates the labor intensive over-under molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 3.59 | g/cm³ | |
| Bulk Factor | 2.5 | ||
| Spiral Flow | 30.0 - 45.0 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (5°C) | 17 | wk | |
| Post Cure Time (160°C) | 2.0 - 4.0 | hr |
| Additional Information |
|---|
| Inductance Ls (µH) : 0.43 - 0.50Quality Factor : 7.3 - 9.5 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 - 180 | °C | |
| Injection Pressure | 0.345 - 5.52 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer FEA-271U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| Shandong PC/ABS PC/ABS-2 | Shandong Dongchen Engineering Plastics Co., Ltd. | PC+ABS | Shandong PC/ABS |
| IDI SMC S90 (Glass Content 22%) | IDI Composites International | TS, Unspecified | IDI SMC |
| Lustran® ABS 752 Q374 | INEOS ABS (USA) | ABS | Lustran® ABS |
| Mafill® CR CTE 6344 | Ravago Group | PP Copolymer | Mafill® |
