Order Products : sales@su-jiao.com
TYNE® Olefins W6213
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Tyne Plastics LLC. |
| Trademark: | TYNE® Olefins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pNgAar_TYNE-Olefins-W6213.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Data was measured on natural colored test specimens. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 0.90 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.020 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 27.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 40 | % | ASTM D638 |
| Flexural Modulus | 2170 | MPa | ASTM D790 |
| Flexural Strength | 34.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 53 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 116 | °C | |
| 1.8 MPa, Unannealed | 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REPOL® H060MG | Reliance Industries Limited | PP Homopolymer | REPOL® |
| ULTEM™ 2400 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| ULTEM™ foam XP060 | SABIC Innovative Plastics | PEI | ULTEM™ foam |
| Altuglas® BS 150N | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Altuglas® |
| Exxtral™ Performance Polyolefin HMU216 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
