Order Products : sales@su-jiao.com
ECOMID ARX N
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Nilit Plastics |
| Trademark: | ECOMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pLAoxG_ECOMID-ARX-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ECOMID® A is an unfilled Polyamide 66 (Nylon 66) compound, UL listed HB. This eco friendly compound is intended for injection molding. ECOMID® A is primarily designed for the Automotive industry. |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow : 23°C | 2.2 | % | |
| Flow : 25°C | 2.2 | % | |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 2.0 | % | |
| Saturation, 23°C | 6.0 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 2500 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 60.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 5.5 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 2.7 | kJ/m² | |
| 23°C | 2.8 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | 36 | kJ/m² | |
| 23°C | 38 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature 1 | 90.0 | °C | IEC 60216 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.400 mm | HB | ||
| 0.800 mm | HB | ||
| 1.60 mm | HB | ||
| 3.20 mm | HB |
| Note Message | |
|---|---|
| 1 . | 20002 hrs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trithene® TS 9022 | Petroquimica Triunfo | LDPE | Trithene® |
| Clariant Nylon 6 PA-212 | Clariant Corporation | Nylon 6 | Clariant Nylon 6 |
| Ferro PP TPP10AC94BK | Ferro Corporation | PP Homopolymer | Ferro PP |
| Electroblend® PP-1805 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP Homopolymer | Electroblend® |
| ELASTOSIL® LR 3842/60 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
