Order Products : sales@su-jiao.com
Tecolen® CP30 NL MY
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Eurotec Engineering Plastics |
| Trademark: | Tecolen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pIfDa4_Tecolen-CP30-NL-MY.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPCP, impact modified, heat & UV stabilized, natural |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 750 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 15.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | > 200 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 60 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | ISO 180/1U | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 40.0 | °C | ISO 75-2/A |
| Melting Temperature 1 | 160 to 165 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+15 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | HB | ||
| 1.60 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | < 60.0 | °C | |
| Processing (Melt) Temp | 200 to 240 | °C | |
| Mold Temperature | 20.0 to 50.0 | °C | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 40.0 to 80.0 | MPa | |
| Back Pressure | Low |
| Note Message | |
|---|---|
| 1 . | 10 K/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| XYRON™ DG235 | Asahi Kasei Chemicals Corporation | PPS+PPE | XYRON™ |
| APICAL 150AF019 | Kaneka Corporation | Film, PI | APICAL |
| Elastamax™ XL-2065 | PolyOne Corporation | TPO (POE) | Elastamax™ |
| EMOPLEN® A 2540 T1 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| Durethan® BKV 25 H2.0 LT 904040 | LANXESS GmbH | Nylon 6 | Durethan® |
