Order Products : sales@su-jiao.com
Lifoflex® UV FLAM 30600
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Müller Kunststoffe GmbH |
| Trademark: | Lifoflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pHPSiw_Lifoflex-UV-FLAM-30600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lifoflex® UV FLAM 30600 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe. Important attributes of Lifoflex® UV FLAM 30600 are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.03 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 1.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 3 sec) | 27 to 33 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 1.60 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 650 | % | DIN 53504 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -50 to 100 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 | |
| Glow Wire Ignition Temperature (3.00 mm) | 850 650 | °C | IEC 60695-2-11 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 80.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Rear Temperature | 180 to 220 | °C | |
| Middle Temperature | 180 to 220 | °C | |
| Front Temperature | 180 to 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trithene® CX 7065 | Petroquimica Triunfo | LDPE | Trithene® |
| VECTOR® 2411P | Dexco Polymers LP | SBC | VECTOR® |
| Akulon® Ultraflow K-FKMV5 /C | DSM Engineering Plastics | Nylon 6 | Akulon® Ultraflow |
| Cellophane™ XS340 | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
| CYCOLAC™ EX39 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
