Order Products : sales@su-jiao.com
Qenos PE GM5010T2
| Category: | HDPE, HMW , High Density (HMW) Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Qenos PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pGplcc_Qenos-PE-GM5010T2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GM5010T2 is a black high molecular weight High Density Polyethylene copolymer grade designed to provide a balance of excellent processing characteristics with toughness, excellent chemical resistance, ESCR and weatherability. It contains an effective stabiliser and carbon black pigment which ensures long service life. A minimum service life of 50 years is achievable under appropriate pressure and temperature conditions. GM5010T2 is designed for use as a general purpose jacketing compound for buried wires and cables where abrasion resistance and cut-through resistance in rocky terrain is required. It is also used for line-wire and drop-wire applications in a wide range of environments. GM5010T2 has also been designed for extrusion into a full range of pressure and non-pressure pipe and fitting sizes, where High Density, PE 80 Type C resins are required. GM5010T2 is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. GM5010T2 is designed to meet the requirements for PE 80 Type C compounds under AS 4131. GM5010T2 is suitable for food contact applications and conforms to the requirements of AS2070. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.10 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 11 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 700 | % | ASTM D638 |
| Flexural Modulus | 800 | MPa | ASTM D790 |
| Additional Information |
|---|
| Carbon Black, ASTM D1606: 2.25%Oxidative Induction Time, ISO/TR 10837, 210°C: >20 min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnamid® T- 27 GF15 FRV0 | Grupa Azoty S.A. | Nylon 6 | Tarnamid® |
| Vidux™ CV-92-A5008A-91 BLACK | Teknor Apex Company | PVC, Flexible | Vidux™ |
| Zelfo HG | Zelfo Technology GmbH | CA | Zelfo |
| CERTENE™ LLI-10030 | Muehlstein | LLDPE | CERTENE™ |
| INEOS PP N12Z-00 | INEOS Olefins & Polymers USA | PP Impact Copolymer | INEOS PP |
