Order Products : sales@su-jiao.com
Ferro PP TPP40AJ38BK
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pFOMl4_Ferro-PP-TPP40AJ38BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Meets/Exceeds Ford Engineering Specification WSK-M4D644-A3. Primary end use is for instrument cluster masks. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.23 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 27.4 | MPa | ISO 527-2 |
| Flexural Modulus | 3800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 1.7 | kJ/m² | ISO 180 |
| 23°C | 2.3 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 130 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 83.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Tensile/Izod Change, ISO 188, 1000 hours, 140°C: +5%/+10% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| METALCAP PPC382C87 | Polyram Ram-On Industries | PP Copolymer | METALCAP |
| Amodel® AT-1116 HS | Solvay Specialty Polymers | PPA | Amodel® |
| Generic PPE+PS+PP - Glass Fiber | Generic | PPE+PS+PP | Generic |
| PAmpellonne® 606s | Politem Plastik Ltd. | Nylon 66 | PAmpellonne® |
| EPAMOULD 650D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
