Order Products : sales@su-jiao.com
Elastocon® 8055BX
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Elastocon TPE Technologies |
| Trademark: | Elastocon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pDqFAz_Elastocon8055BX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Elastocon® 8055BX is a black high density thermoplastic elastomer formulated for applications that require rubber-like properties and a good surface finish. Elastocon® 8055BX is well suited for consumer goods and industrial applications requiring U.V. stability. Elastocon® 8055BX can be overmolded to polypropylene. Elastocon® 8055BX is supplied as ready to use pellets in 1000 lb. quantities. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 58 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.50 | MPa | ASTM D412 |
| Tensile Strength | 3.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 540 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 174 - 191 | °C | |
| Front Temperature | 179 - 196 | °C | |
| Nozzle Temperature | 185 - 204 | °C | |
| Mold Temperature | 21 - 38 | °C | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Screw Compression Ratio | 2.5:1.0 - 3.0:1.0 |
| Injection instructions |
|---|
| Elastocon® 8055BX thermoplastic elastomer compound does not require drying. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 79 | °C | |
| Cylinder Zone 1 Temp. | 191 | °C | |
| Cylinder Zone 5 Temp. | 232 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADDILENE J 120 M20 | ADDIPLAST | PP Copolymer | ADDILENE |
| Axiall PVC 8640 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Durethan® DP AKV 50 HR H2.0 901510 | LANXESS GmbH | Nylon 66 | Durethan® |
| OmniCarb™ PC08FR 701 | OMNI Plastics, LLC | PC | OmniCarb™ |
| Braskem PE LDI2020 | Braskem IDESA | LDPE | Braskem PE |
