Order Products : sales@su-jiao.com
SureSpec HD53-5000
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pCrrem_SureSpec-HD53-5000.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD53-5000 is a certified prime grade designed for injection molding of multi-cavity thin-wall food containers. HD53-5000 offers a balance of excellent processability, good impact strength, good stiffness and toughness. HD53-5000 complies with FDA regulation 21CFR 177.1520(c) 3.2a. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 23.4 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 15 | % | ASTM D638 |
| Flexural Modulus 3 | 1000 | MPa | ASTM D790 |
| Additional Information |
|---|
| Test Made on injection molded Type 1 tension test specimen according to ASTM D2146 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANAMID 6 B22^E F15 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| AIE PC/ABS A2200HF-T8 | Asia International Enterprise (Hong Kong) Limited | PC+ABS | AIE PC/ABS |
| Badamid® B70 L | Bada AG | Nylon 6 | Badamid® |
| Hifax CB252 | LyondellBasell Industries | TPO (POE) | Hifax |
| Perfactory® WIC100G | EnvisionTEC, Inc. | Acrylic, Unspecified | Perfactory® |
