Tecnoflon® FOR TF

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	pCp4lp_Tecnoflon-FOR-TF.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR TF is a high viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68% fluorine content. Tecnoflon® FOR TF is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers. Some of the basic properties of Tecnoflon® FOR TF are: Excellent chemical resistance Good compression set Excellent mould release Lack of mould fouling Superior mould flow Tecnoflon® FOR TF can be used for compression and transfer moulding of seals, gaskets or any item requiring excellent chemical resistance. This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Tecnoflon® FOR TF can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR TF is a high viscosity cure incorporated fluoroelastomer terpolymer (FKM) with 68% fluorine content. Tecnoflon® FOR TF is well suited for applications requiring better chemical resistance and/or long term heat resistance compared to fluoroelastomer copolymers.

Some of the basic properties of Tecnoflon® FOR TF are:

Excellent chemical resistance

Good compression set

Excellent mould release

Lack of mould fouling

Superior mould flow

Tecnoflon® FOR TF can be used for compression and transfer moulding of seals, gaskets or any item requiring excellent chemical resistance.
This material can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers.
Tecnoflon® FOR TF can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Additive	Processing Aid
Features	Good Chemical Resistance Good Flow Good Heat Aging Resistance Good Mold Release Good Processability High Viscosity Low Compression Set Terpolymer
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	57	MU
Fluorine Content ²	68	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Safrene® F 7660	Safripol (PTY) LTD	HDPE	Safrene®
4DUR® 9K23100 HI	4Plas	PBT	4DUR®
NYLOY® MG-0033N-V0	Nytex Composites Co., Ltd.	Nylon 66	NYLOY®
Petlon R-Prime A2-G50-00-NT	Petlon Polymers Ltd	Nylon 6	Petlon R-Prime
GELOY™ HRA222F resin	SABIC Innovative Plastics Europe	ASA+PC	GELOY™