Order Products : sales@su-jiao.com
RTP 2740 S-30A
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | pCiKsA_RTP-2740-S-30A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| General Purpose |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 2.0 to 2.5 | % | ASTM D955 |
| Moisture Content | 0.040 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 34 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.924 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 4.09 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 580 | % | ASTM D412 |
| Tear Strength 1 | 17.2 | kN/m | ASTM D624 |
| Compression Set 2 | ASTM D395B | ||
| 23°C, 22 hr | 11 | % | |
| 158°C, 22 hr | 37 | % |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm, ** Values per RTP Company testing.) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Processing (Melt) Temp | 163 to 204 | °C | |
| Mold Temperature | 15.6 to 37.8 | °C | |
| Injection Pressure | 34.5 to 68.9 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymist® XPP 535 | Solvay Specialty Polymers | PTFE | Polymist® |
| NOVAPOL® HB-W555-AC | NOVA Chemicals | HDPE | NOVAPOL® |
| Durethan® AKV 35 H2.0 SR1 901510 | LANXESS Corporation | Nylon 66 | Durethan® |
| INTENE® C 30 AF | Versalis S.p.A. | PBR, Low Cis | INTENE® |
| LUBEMID A26 NATURAL HS | LUBEN PLAST srl | Nylon 66 | LUBEMID |
