Order Products : sales@su-jiao.com
Andur 2-60DP/Curene® 280
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p9GsQK_Andur-2-60DP-Curene-280.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| All properties based on Andur® 2-90DP cured with Curene® 280 |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 94 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 26.3 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 460 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 8.89 | MPa | ASTM D412 |
| 300% strain | 14.0 | MPa | ASTM D412 |
| Tear Strength | |||
| -- 1 | 84.1 | kN/m | ASTM D624 |
| Cracking | 32 | kN/m | ASTM D470 |
| Compression Set | 32 | % | ASTM D395 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Post Cure Time (23°C) | 72 | hr |
| Additional Information |
|---|
| Prepolymer NCO%: 6.8-7.2Grams Curene® 280 per 100 grams prepolymer: 44.3Rebound, %: 47Stoichiometry: 0.95Prepolymer Temperature, °F: 190-210Curene® 280 Temperature, °F: 158Post Cure Time, 212°F, hours: 16 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 107 | °C |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKNIFLEX® VAV52005 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PCTFE/PVC | TEKNIFLEX® |
| Chemlon® MDF463 | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| ICORENE® 1761 V2 White 1801 | ICO Polymers EMEA, A Division of A. Schulman | mMDPE | ICORENE® |
| INSULCAST® 987 CM | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| Iupilon® EFR2151H | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
