Order Products : sales@su-jiao.com

EVALENE® LLDPE LJ20241

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	JG Summit Petrochemical Corporation
Trademark:	EVALENE® LLDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	p7DiNt_EVALENE-LLDPE-LJ20241.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LLDPE is used for heavy-duty sacks, lamination films, industrial cosmetics, pharmaceutical and food packaging materials. Low Heat Seal Temperatures. Strong Seals. Excellent Tear, Puncture and Impact Strengths. These properties make Evalene® the best choice for LLDPE packaging films. Its outstanding environmental stress crack resistance, good impact properties at low temperatures, and warp resistance also make it attractive for injection molding applications.

Message

LLDPE is used for heavy-duty sacks, lamination films, industrial cosmetics, pharmaceutical and food packaging materials.

Low Heat Seal Temperatures. Strong Seals. Excellent Tear, Puncture and Impact Strengths.

These properties make Evalene® the best choice for LLDPE packaging films. Its outstanding environmental stress crack resistance, good impact properties at low temperatures, and warp resistance also make it attractive for injection molding applications.

General Information
Features	Good Processability Good Tear Strength High ESCR (Stress Crack Resist.) High Gloss High Impact Resistance Low Temperature Heat Sealability Low Temperature Impact Resistance Puncture Resistant Warp Resistant
Uses	Color Concentrates Lids Toys
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.924	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	20	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ¹	250	MPa	ASTM D638
Tensile Strength ²(Yield)	10.0	MPa	ASTM D638
Tensile Elongation ³(Break)	> 1000	%	ASTM D638

Note Message
1 .	5.0 mm/min
2 .	50 mm/min
3 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
PULSE™ 2100LG	Trinseo	PC+ABS	PULSE™
Silopren® LSR 3596/30	Momentive Performance Materials Inc.	Silicone Rubber, LSR	Silopren®
Tarnoform® 300	Grupa Azoty S.A.	Acetal (POM) Copolymer	Tarnoform®
XYRON™ L565V	Asahi Kasei Chemicals Corporation	PPE+PS	XYRON™
EPO-TEK® GE116	Epoxy Technology Inc.	Epoxy	EPO-TEK®