Order Products : sales@su-jiao.com

Borealis WD170CF

Category:	PP, Unspecified , Polypropylene
Manufacturer:	Borealis AG
Trademark:	Borealis
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	p6wxGI_Borealis-WD170CF.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
WD170CF is a polyolefin resin suitable for the manufacturing of non-oriented sterilisable peelable cast films on chill roll processes. CAS-No. 9010-79-1 & 9002-88-4 Applications: WD170CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of WD170CF . Lamintion Films, Lidding Film, Retort food packaging, and Medical device packaging. Features: Seal ang peelable against itself, seal and peelable against Polypropylene and Sterilizable by means of water steam.

Message

WD170CF is a polyolefin resin suitable for the manufacturing of non-oriented sterilisable peelable cast films on chill roll processes.

CAS-No. 9010-79-1 & 9002-88-4

Applications:
WD170CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of WD170CF .
Lamintion Films, Lidding Film, Retort food packaging, and Medical device packaging.

Features:
Seal ang peelable against itself, seal and peelable against Polypropylene and Sterilizable by means of water steam.

General Information
Features	Steam Sterilizable
Uses	Cast Film Film Food Packaging Laminates Medical/Healthcare Applications Non-oriented Film Packaging
Processing Method	Cast Film

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	6.5	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus ¹(23°C, Injection Molded)	800	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Melting Temperature (DSC)	110 to 150	°C	ISO 11357-3

Note Message
1 .	50% RH

Resin Grade	Manufacturer	Category	Trademark
Quadrant EPP Semitron® ESd 490HR	Quadrant Engineering Plastic Products	PEEK	Quadrant EPP
SABIC® PP 525P	Saudi Basic Industries Corporation (SABIC)	PP Homopolymer	SABIC® PP
Trademark PE mLLD1918B	Trademark Plastics Corporation	mLLDPE	Trademark PE
NITRIFLEX L-2108	NITRIFLEX	SBR, Unspecified	NITRIFLEX
Generic PP+EPDM - Mineral	Generic	PP+EPDM	Generic