Order Products : sales@su-jiao.com
Generic PPE - Glass Fiber
| Category: | PPE , Polyphenylene Ether |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p6PSaD_Generic-PPE---Glass-Fiber.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PPE - Glass Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 - 1.28 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.20 - 0.31 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.060 - 0.10 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6750 - 9060 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 97.1 - 111 | MPa | ASTM D638 |
| 23°C | 48.3 - 110 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.5 - 8.1 | % | ASTM D638 |
| Flexural Modulus (23°C) | 3620 - 9300 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 56.5 - 159 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 56 - 110 | J/m | ASTM D256 |
| Unnotched Izod Impact (23°C) | 330 - 550 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 133 - 150 | °C | ASTM D648 |
| Vicat Softening Temperature | 118 - 200 | °C | ISO 306 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 99.8 - 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 264 - 280 | °C | |
| Middle Temperature | 273 - 300 | °C | |
| Front Temperature | 274 - 300 | °C | |
| Mold Temperature | 69.1 - 112 | °C | |
| Injection Pressure | 103 - 200 | MPa |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PPE - Glass FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimoTek KM6080 | KMI Group Inc. | PBT | PrimoTek |
| Qenos PP PPU 1080 | Qenos Pty Ltd | PP Homopolymer | Qenos PP |
| Wanthane® WHT-1690AB | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| Sylvin 8820H NATURAL | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| VALOX™ 451E resin | SABIC Innovative Plastics | PBT | VALOX™ |
