Order Products : sales@su-jiao.com

Tecnoflon® FOR 421/U

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	p4VREt_Tecnoflon-FOR-421-U.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 421/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade is well suited for applications where superior flow, mold release, and excellent compression set are required. Tecnoflon® FOR 421/U can be compounded to meet the major fluoroelastomer specifications. Some of the basic properties of Tecnoflon® FOR 421/U are: Very fast cure rate Very good scorch safety Superior mold flow Excellent mold release Lack of mold fouling Excellent compression set Good extrusion TECNOFLON® FOR 421/U can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 421/U is a low viscosity cure incorporated fluoroelastomer copolymer. This grade is well suited for applications where superior flow, mold release, and excellent compression set are required. Tecnoflon® FOR 421/U can be compounded to meet the major fluoroelastomer specifications.

Some of the basic properties of Tecnoflon® FOR 421/U are:

Very fast cure rate

Very good scorch safety

Superior mold flow

Excellent mold release

Lack of mold fouling

Excellent compression set

Good extrusion

TECNOFLON® FOR 421/U can be used for injection and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Copolymer Fast Cure Good Flow Good Mold Release Good Processability Low Compression Set Low Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Extrusion Injection Molding Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	24	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
Polytech & Net VC710	Polytech & Net Gmbh	EVA	Polytech & Net
Tenopom® POM B3 TZ MF NTLA010 PR333 MSP	Petropol Industry and Trade of Polymers LTDA	Acetal (POM) Copolymer	Tenopom® POM
Xuchuan XCW-8750H-6	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
Diaterm® A27 GK30	DTR S.r.l. (Develop Thermoplastic Resins)	Nylon 6	Diaterm®
Elvax® 3135XZ	DuPont Packaging & Industrial Polymers	EVA	Elvax®