Order Products : sales@su-jiao.com
DuraGrip® DGR 6040NCHT
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Advanced Polymer Alloys |
| Trademark: | DuraGrip® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p3yyXq_DuraGrip-DGR-6040NCHT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DuraGrip® DGR 6040NCHT is a general purpose Thermoplastic Elastomer (TPE) designed to,process easily in injection molding and extrusion. It features excellent soft touch feel with,improved surface tack that produces superior grip qualities. DGR 6040NCHT, will bond to,olefinics, and is easily colored. DuraGrip® DGR 6040NCHT is not hygroscopic and under,normal conditions does not require drying. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.988 | g/cm³ | ASTM D792, ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 40 | ASTM D2240, ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.21 | MPa | ASTM D412, ISO 37 |
| Tensile Strength (Yield) | 4.96 | MPa | ASTM D412, ISO 37 |
| Tensile Elongation (Break) | 750 | % | ASTM D412, ISO 37 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (190°C, 200 sec^-1) | 127 | Pa·s | ASTM D3835 |
| Additional Information |
|---|
| The value listed as Density -Specific Gravity, ASTM D792, was tested in accordance with ASTM D471.The value listed as Density, ISO 1183, was tested in accordance with ISO 2781. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 188 - 199 | °C | |
| Middle Temperature | 199 - 210 | °C | |
| Front Temperature | 216 - 227 | °C | |
| Nozzle Temperature | 204 - 221 | °C | |
| Processing (Melt) Temp | 199 - 221 | °C | |
| Mold Temperature | 43.3 - 54.4 | °C | |
| Injection Pressure | 1.03 - 4.14 | MPa | |
| Screw Speed | 25 - 100 | rpm |
| Injection instructions |
|---|
| Injection Speed: 1 to 3 in³/secInjection Time (1st Stage/Boost): 0.5 to 4 secSecond Stage Pressure: 150 to 300 psiSecond Stage Time: 3 to 10 secCooling Time: 10 to 20 secBack Pressure: 20 to 75 % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® FABS 17 GF | A. Schulman Europe | ABS | POLYMAN® |
| TABOREN PC 42 T 20 | SILON s.ro | PP Copolymer | TABOREN |
| WPP PP PPC3MF3-Black | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| BCC Resins BC 6126 | BCC Products Inc. | Epoxy | BCC Resins |
| Clariant ABS ABS3470 | Clariant Corporation | ABS | Clariant ABS |
