Order Products : sales@su-jiao.com
Razalen® Q121
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Razin™ Engineering Plastics |
| Trademark: | Razalen® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p3rgw4_Razalen-Q121.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Razalen Q121 is a general purpose injection grade black color homopolymer polypropylene. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.5 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 13 | % | ASTM D638 |
| Flexural Modulus | 1500 | MPa | ASTM D790 |
| Flexural Strength | 40.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Area) (23°C) | 3.00 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 100 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Rear Temperature | 200 to 220 | °C | |
| Middle Temperature | 200 to 220 | °C | |
| Front Temperature | 200 to 220 | °C | |
| Processing (Melt) Temp | 200 to 230 | °C | |
| Mold Temperature | 30.0 to 60.0 | °C | |
| Injection Pressure | 50.0 to 150 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zenite® 7244 | Celanese Corporation | LCP | Zenite® |
| NEO-ZEX™ 2511F | Prime Polymer Co., Ltd. | LLDPE | NEO-ZEX™ |
| Niplene F30 AGR HI | Soredi S.p.a. | PP Homopolymer | Niplene |
| DynaStat® 2257 | Polymer Dynamix | Nylon 12 | DynaStat® |
| POLYfill PPC B8075 | Polykemi AB | PP Copolymer | POLYfill |
