Order Products : sales@su-jiao.com
Jam PE 25525
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | p3FKHN_Jam-PE-25525.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 25525 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Africa & Middle East. Typical application: Caps/Lids/Closures. Primary characteristic: butene comonomer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 14.0 | MPa | |
| Break, Compression Molded | 7.50 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 30 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 88.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 A | RTP Company | Nylon 6 | RTP |
| Ravago Compounds PP-6444 | Ravago Manufacturing Americas, LLC | PP Homopolymer | Ravago Compounds |
| UNITIKA Nylon 6 EX-8406G30 | UNITIKA Plastics Division | Nylon 6 | UNITIKA Nylon 6 |
| CABELEC® CC6057 | Cabot Corporation | PP Copolymer | CABELEC® |
| Braskem PE SLH0820/30AF | Braskem | LLDPE | Braskem PE |
