Order Products : sales@su-jiao.com
EnCom WR PC-ABS 1245
| Category: | PC+ABS , Polycarbonate + ABS |
| Manufacturer: | EnCom, Inc. |
| Trademark: | EnCom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | oxmmRo_EnCom-WR-PC-ABS-1245.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Wear Resistant PC/ABS |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (260°C/5.0 kg) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2240 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 50 | % | ASTM D638 |
| Flexural Modulus | 2280 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 0.0827 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 240 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 132 | °C | |
| 1.8 MPa, Unannealed | 113 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.18 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 to 104 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 232 to 260 | °C | |
| Middle Temperature | 235 to 263 | °C | |
| Front Temperature | 241 to 274 | °C | |
| Nozzle Temperature | 246 to 274 | °C | |
| Processing (Melt) Temp | 246 to 274 | °C | |
| Mold Temperature | 79.4 to 93.3 | °C | |
| Back Pressure | 0.172 to 0.689 | MPa | |
| Screw Speed | 25 to 75 | rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1601 L | RTP Company | PAS | RTP |
| Tekuform C13 | TEKUMA Kunststoff GmbH | Acetal (POM) Copolymer | Tekuform |
| SynPlast™ L9TM-E | PolyOne Corporation | Triisononyl Trimellitate | SynPlast™ |
| Arlon® 1287 LI | Greene, Tweed & Co. | PEEK | Arlon® |
| CROSSVINIL EK/82 AZ | Crosspolimeri S.p.A. | PVC, Unspecified | CROSSVINIL |
