Order Products : sales@su-jiao.com
ISOTHANE® G1680A-E
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Great Eastern Resins Industrial Co Ltd (GRECO) |
| Trademark: | ISOTHANE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ouWN6l_ISOTHANE-G1680A-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ISOTHANE G1680A-E products is polyether based thermoplastic polyurethanes with good balanced qualities. It exhibits high moisture vapor transmission and environment-friendly TPU based on renewable materials with bio-based content 28%. The product can be injected, extruded and blowed. |
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ross Flex 1(-6°C) | No Break | ASTM D1052 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Biobased Content | 28.0 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission 2 | 9000 | g/m²/24 hr | ASTM E96 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 8.00 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 18.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Tear Strength 3 | 100 | kN/m | ASTM D624 |
| Injection | Nominal Value | ||
|---|---|---|---|
| Screw L/D Ratio | 25.0:1.0 | ||
| Screw Compression Ratio | 3.0:1.0 |
| Injection instructions |
|---|
| Feed Section: 180 °CTransition Section: 185 °CMetering Section 1: 185 °CMetering Section 2: 185 °CDie: 180 °C |
| Note Message | |
|---|---|
| 1 . | 150000 times |
| 2 . | Procedure BW |
| 3 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TPC PVC SG71Z | Thai Plastics and Chemicals Public Company Limited | PVC, Flexible | TPC PVC |
| ASTALOY™ MB2106 | Marplex Australia Pty. Ltd. | PC | ASTALOY™ |
| ETILINAS BPD 4038 | POLYETHYLENE MALAYSIA SDN BHD | MDPE | ETILINAS |
| Optital 900C | The Materials Group | Acetal (POM) Copolymer | Optital |
| Rotuba CAP CP800 (10% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
