Order Products : sales@su-jiao.com
Spartech Polycom SC2-1230S
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ouD1PY_Spartech-Polycom-SC2-1230S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SC2-1230S is a medium viscosity, high impact polystyrene (HIPS) resin for injection molding that features 30% glass bead reinforcement. It is heat stabilized and lubricated for good processing characteristics. HIPS are rubber modified styrenics that typically contain 1-10% rubber by weight. They offer dimensional and physical stability in moist environments and provide good chemical resistance. These materials also exhibit good flexibility along with good toughness. A very versatile product for a wide variety of applications, Spartech SC2-1230S is recommended for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 17.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 33 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2520 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 89.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 - 82.2 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 200 - 220 | °C | |
| Middle Temperature | 205 - 225 | °C | |
| Front Temperature | 210 - 230 | °C | |
| Nozzle Temperature | 210 - 230 | °C | |
| Processing (Melt) Temp | 191 - 260 | °C | |
| Mold Temperature | 26.7 - 48.9 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nymax™ 1200 HR NC088 | PolyOne Corporation | Nylon 66 | Nymax™ |
| CP PRYME® Polyethylene PE100HDH-8M | Chase Plastics Services Inc. | HDPE | CP PRYME® Polyethylene |
| CP PRYME® Polypropylene PPC100-8M | Chase Plastics Services Inc. | PP Copolymer | CP PRYME® Polypropylene |
| InnoTuf® HP-1060A | Innovative Polymers, Inc. | TSU-Ester | InnoTuf® |
| Plaslube® AC-80/TF/30 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
