Order Products : sales@su-jiao.com
ISPLEN® PR 210 X6E
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | otPBGG_ISPLEN-PR-210-X6E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ISPLEN® PR-210 X6E is a random ethylene-propylene copolymer with a high molecular weight. Due to averagely good flow properties and very high mechanical properties is a suitable grade to be processed into pipes. STABILIZATION ISPLEN® PR-210 X6E is a statistic (random) copolymer which contains a specific formulation for high thermal resistant and water extraction purposes allowing polymer stability during normal conditions of processing and use. Other additives may be included. COLOURING ISPLEN grades are supplied in natural colour but they can be easily coloured with pigments steady at processing temperatures, using dry -colouring or masterbatch techniques. FOODSTUFF REGULATIONS ISPLEN® PR-210 X6E are approved for food contact under certain legislation. For more information about specific country regulation, please, contact with our local representative or the Technical Service. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.903 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/5.0 kg | 0.60 | g/10 min | |
| 230°C/2.16 kg | 0.30 | g/10 min | |
| 230°C/5.0 kg | 1.2 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 71 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 22.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 10 | % | ISO 527-2 |
| Flexural Modulus | 850 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| 0°C | 3.0 | kJ/m² | |
| 23°C | 18 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 65.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 133 | °C | ISO 306/A |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 to 200 | °C | |
| Cylinder Zone 2 Temp. | 190 to 205 | °C | |
| Cylinder Zone 3 Temp. | 195 to 210 | °C | |
| Cylinder Zone 4 Temp. | 195 to 215 | °C | |
| Cylinder Zone 5 Temp. | 200 to 220 | °C | |
| Melt Temperature | 205 to 225 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Terlux® HD 2822 | INEOS Styrolution Group GmbH | MABS | Terlux® |
| Xuchuan XCY-5590 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Aquivion® D72-25BS | Solvay Specialty Polymers | PFSA | Aquivion® |
| ASTALAC™ ASA 309 (Automotive) | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| Cellophane™ 500PUT | Innovia Films Ltd. | Cellulose, Regenerated | Cellophane™ |
