Order Products : sales@su-jiao.com
Lucopren® SE 1540-55FSL
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | Lucobit AG |
| Trademark: | Lucopren® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | osngwa_Lucopren-SE-1540-55FSL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lucopren® SE 1540-55FSL is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) product. It is available in Europe. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.17 to 1.21 | g/cm³ | DIN 53479 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 2.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 55 to 61 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | DIN 53504-S2 | ||
| 100% Strain | 2.00 | MPa | |
| 300% Strain | 3.00 | MPa | |
| 500% Strain | 4.00 | MPa | |
| Tensile Stress (Yield) | 5.50 to 7.50 | MPa | DIN 53504-S2 |
| Tensile Elongation (Break) | 650 to 850 | % | DIN 53504-S2 |
| Compression Set | DIN 53517 | ||
| 23°C, 72 hr | 30 to 40 | % | |
| 70°C, 24 hr | 45 to 55 | % | |
| 100°C, 24 hr | 70 to 80 | % |
| Note Message | |
|---|---|
| 1 . | Method A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MELOPAS® MF 2010 | RASCHIG GmbH | Mel Formald | MELOPAS® |
| SPESIN® KP513MT25BK | Kolon Plastics, Inc. | PBT | SPESIN® |
| UNITHENE® LH606-13 | USI Corporation | HDPE | UNITHENE® |
| Boda BDF-H2852 | Chenguang Fluoro & Silicone Elastomers Co., Ltd. | Fluorelastomer | Boda |
| Celstran® PA66-GF60-02 P11/14 | Celanese Corporation | Nylon 66 | Celstran® |
